IP

Tuesday, September 21, 2010

Fresh Proxy Raya Edition

Sorry kawan2.. lama aku x scan proxy sebab bz kerja.. ni ada proxy yg kira ok2 juga. boleh guna men banjir irc dan juga surf internet.. ping time bawah 500..

201.209.103.115:3128
201.56.40.28:3128
201.221.148.21:3128
85.105.226.50:8080
200.7.178.77:3128
202.138.250.13:8080
208.43.91.221:3128
119.110.81.125:8080
88.181.31.125:80
109.169.26.139:3128
217.153.63.83:80
174.36.27.171:8008
173.201.183.172:8080
121.30.255.38:8080
201.252.254.98:3128
208.43.91.222:3128
89.184.39.190:8080
220.247.168.151:3128
190.144.93.154:8080
66.42.182.178:3128
58.248.29.14:3128
202.108.5.152:80
210.212.164.162:3128
77.91.195.16:3128
41.234.204.181:80
201.76.211.246:3128
196.218.150.226:8080
222.124.132.146:8080
41.234.206.241:80
196.1.198.234:8080
110.136.168.186:80
189.3.209.66:8080
196.202.55.2:8080
41.215.180.130:8080
200.195.38.98:8080
221.11.35.175:808
84.254.195.57:3389
189.10.83.231:8080
74.63.111.215:80
189.3.47.146:3128
118.96.150.88:3128
200.48.250.99:8080
110.138.236.92:3128
208.92.249.118:80
217.24.250.235:80
118.97.67.134:3128
202.43.183.205:8080
111.11.192.250:8080
202.143.129.201:8080
201.64.156.82:8080
118.96.86.23:3128
201.31.148.66:8080
190.90.128.233:8080
118.97.29.10:80
190.41.141.228:80
195.24.202.30:8080
189.84.116.88:3128
222.162.105.110:8080
83.216.184.132:8080
125.167.195.203:8080
41.234.202.94:80
208.100.40.47:80
41.217.220.138:8080
200.117.239.246:8080
93.99.206.9:8080
200.169.67.194:3128
80.233.225.180:8080
83.244.113.93:8080
80.74.164.4:3128
190.34.168.183:80
189.45.18.1:3128
200.35.38.10:8080
200.195.232.210:80
187.73.13.5:3128
118.98.172.142:8080
88.199.142.19:8000
189.1.162.76:80
125.163.164.15:80
41.73.2.35:80
110.138.48.132:8080
80.193.72.145:80
200.81.59.104:80
80.74.114.58:80
83.244.119.206:8080
41.73.2.34:8080
83.244.115.193:8080
217.150.32.86:80
58.69.143.70:3128
110.138.48.115:8080
208.100.40.40:80
216.52.207.73:80
212.118.224.151:80
208.100.40.34:80
208.100.40.42:80
208.100.40.43:80
208.100.40.46:80
208.100.40.37:80
212.118.224.153:80
208.100.40.44:80
118.97.234.253:8080
217.24.250.238:8000
82.119.76.144:80
208.100.40.35:80
200.57.88.164:80
202.138.234.37:8080
217.24.250.238:80
217.24.250.235:8000
202.51.107.34:8080
212.118.224.152:80
213.192.246.133:80
72.52.96.11:80
119.252.172.138:3128
72.52.96.18:80
72.52.96.38:80
222.161.3.133:8080
222.169.11.102:8080
125.21.227.205:80
202.182.189.107:8080
202.149.67.97:8080
202.154.63.133:8080
222.161.137.199:8080
125.21.227.206:80
222.124.129.44:8080
114.30.47.10:80
202.85.233.8:80

Create A Shorter Link!

http://tiny.cc/2ks18 = http://proxy2u.blogspot.com

Saturday, September 11, 2010

Nokia Code

On the main screen type in:
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
+/- Title of the post link
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# *#7328748263373738# resets security code.
Default security code is 12345 Change closed caller group (settings security settingsuser groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold "0" on the main screen to open wap browser.

On the main screen type in:
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
+/- Title of the post link
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# *#7328748263373738# resets security code.
Default security code is 12345 Change closed caller group (settings security settingsuser groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold "0" on the main screen to open wap browser.

Monday, September 6, 2010

MyKad Identity Number

01, 21, 22, 23, 24 – Johor
02, 25, 26, 27 – Kedah
03, 28, 29 – Kelantan
04, 30 – Malacca
05, 31, 59 – Negeri Sembilan
06, 32, 33 – Pahang
07, 34, 35 – Penang
08, 36, 37, 38, 39 – Perak
09, 40 – Perlis
10, 41, 42, 43, 44 – Selangor
11, 45, 46 – Terengganu
12, 47, 48, 49 – Sabah
13, 50, 51, 52, 53 – Sarawak
14, 54, 55, 56, 57 – Federal Territory of Kuala Lumpur
15, 58 – Federal Territory of Labuan
16 – Federal Territory of Putrajaya

Sunday, September 5, 2010

Khas Utk Kawan2 Yang suka masuk2 blog aku ni.. ambik aa gambar tu!

Tips Lajukan Firefox

Kalo korang guna firefox macam aku korang patut buat benda ni.

1.Taip "about:config" dekat "address" pastuh tekan "enter".Scroll tikus korang sampai jumpa benda entries ni:

network.http.pipelining
network.http.proxy.pipelining
network.http.pipelining.maxrequests +/- Baca Lagi..

Biasanya pelayan internet akan satu permintaan dalam satu2 masa.Jadi
kalo korang "enable pipelining" membolehkan pelayan korang membuatkan banyak permintan dalam satu2 masa.

2.Ubah "entries" macam bawah ni:

ubah "network.http.pipelining" kepada "true"

ubah "network.http.proxy.pipelining" kepada "true"

ubah "network.http.pipelining.maxrequests" kepada nombor macam "30". Bermaksud pelayan akan membuat 30 permintaan dalam satu masa.

3.Ok akhir sekali,"right click" kat mana2 pastu pilih "New -> Integer"
Namakan ia "nglayout.initialpaint.delay" pastu tetapkan "values" kepada "0".
Ini masa pelayan korang menunggu sebelum bertindak balas dengan maklumat yang diterima.

Kalo korang guna broadband pelayan korang akan muat-turun 2-30x maklumat lebih laju.Harap benda ni berguna untuk korang.